Yingkou Jinhua Machinery Manufacture Co.,Ltd.
Contact: Ms. Lu
Postcode: 115000
Phone: 0417-2611139
Fax: 0417-2639111
Email: ykjinhua@hotmail.com
Sales Hotline: 18841716688
Website: www.ykjinhua.com/en
Address: 114#west,third floor,zhanqian district,yingkou city,liaoning provine
1.The method of using the large tire changer to disassemble and assemble tires on the Gasdi model.
Disassembly steps:
1) Disconnect the battery negative wiring and remove the bolts that fix the suspension assembly to the vehicle body.
2) Lift and support the car safely. Remove the tire and wheel assembly.
3) Remove the brake hose from the brake hose bracket. Remove the brake hose fixing bolts from the suspension.
4) Support the hub and brake disc assembly. Remove the bolts that secure the suspension to the stand.
5) Install a suitable tool in the support slot to pull the suspension assembly out of the support.
6) Remove the suspension from the car.
installation steps:
1) Install the suspension and tighten the upper fixing nut with a torque of 29-43 lbf · ft (39-59N · m) and the lower end fixing bolt with a torque of 25-40 lbf · ft (34-54N · m).
2) Install the brake hose and bracket assembly, install the wheels and lower the car.
2.Other Macpherson suspensions
Disassembly steps:
1) Disconnect the battery negative wiring. If an air spring is installed, remove the case and air pipe assembly.
2) Remove the bolts that fix the suspension assembly to the frame.
3) Lift and support the car safely. Remove the tire and wheel assembly.
4) Disassemble the brake hose from the brake caliper, remove the brake hose retaining clip, and remove the brake hose from the shock absorber slider.
5) Remove the bolts that fix the shock absorber slide to the support, and remove the bolts that fix the shock support to the support.
6) Carefully and gradually pull out the suspension assembly at the position below the support assembly.
7) Remove the suspension assembly from the car.
installation steps:
1) Install the suspension assembly on the car and tighten the suspension fixing bolts with a torque of 28-37 lbf · ft (38-50N · m).
2) Install the brake hose on the brake caliper and deflate the brake system. If an air spring is installed, install the air pipe assembly.
3) Install wheels and tires. Put down the car, connect the battery negative wiring, and test the operation of the car
The preferred price of tire chopping machine is Yingkou Jinhua Machinery Manufacturing Co., Ltd.
